Call us now 0800 336 666
Call us now 0800 336 666
$0.00
Extreme pressure gear oils (API GL-3, GL-4, GL-5, SAE J2360) contain specific additive formulas designed to provide long term wear protection.
GearMaxx is a commercial additive package designed to blend with these oils to complement and enhance the protection of equipment under difficult performance requirements where the oil alone proves inadequate. Conventional EP additives generally require elevated temperatures to initiate their film strength. The enhanced high strength protective film becomes much less temperature dependent when using GearMaxx; providing better protection on start up and in cold weather applications.
GearMaxx is compatible with mineral based (Group II + III) and synthetic-based polyalphaolefin and diester (Group IV) gear oils. GearMaxx is not recommended for
use with water based fluids, phosphate esters or polyglycol fluids.
GearMaxx: Use with SAE J2360, API GL-3, GL-4, and GL5 gear oils 5% GearMaxx to oil volume ratio is the recommended concentration for most applications. Oil monitoring is highly recommended when using concentrations greater than 5% Gear Maxx.
Over the life of a fluid the additive package depletes. GearMaxx can extend fluid life and slow the process of oil degradation. Friction reduction specifically in
boundary or mixed lubrication conditions lowers operating temperature, limiting the effects of fluid oxidation. GearMaxx can also be used to readditize gear oil that has lost crucial additives over its service life. GearMaxx is a commercial additive package designed to blend with these oils to complement and enhance the protection of equipment under difficult performance requirements where the oil alone proves inadequate. Conventional EP additives generally require elevated
temperatures to initiate their film strength. The enhanced high strength protective film becomes much less temperature dependent when using GearMaxx;
providing better protection on start up and in cold weather applications. GearMaxx is intended for use in gear reducers, bearing housings, positrac and limited slip differentials, cone and jaw crushers, pulverizing equipment, final drives, conveyor gear boxes, manual transmissions, drop boxes, rotary tables, tube and ball mills, chain drives, mud pumps, bull gear and pinion sets, oil bath hubs and other oil lubricated systems which call for extreme pressure (EP) oils.
DESIGNED FOR PERFORMANCE
• Extend Oil service Life
• Improves energy efficiency
• Integrates well with synthetic and conventional gear oils
• Reduces Ultrasonic noise caused by component wear
• Reduces fuel and/or electrical power consumption in many applications
• Improves filtration efficiency by reducing the generation of large wear particles.
• Increases equipment availability; extends component life
• Enhances film strength and improves shear resistance.
This carefully balanced formula is designed to complement and enhance the existing gear oil formulations.
GearMaxx should be mixed with the oil prior to being put into service. May be added to component directly when needed. Oil Analysis is recommended when extending fluid service life. TREAT RATIO 5% of oil volume or 3% of oil volume when using high viscosity gear oils (ISO 320 and above)